Brand: Rx Clear

Features:

• UV Protection for Chlorine – Rx Clear Pool Conditioner and Stabilizer helps reduce chlorine loss caused by sunlight and UV exposure. Adding cyanuric acid at pool opening supports more consistent chlorine levels in both above ground and inground swimming pools.
• Supports Chlorine Efficiency – Help extend the usable life of chlorine by reducing rapid breakdown from direct sun exposure. This stabilizer supports improved chemical efficiency and helps maintain more consistent chlorine readings during peak sunlight conditions.
• Simple Spring Application – For best results, add stabilizer when opening your pool. Use a dependable pool test kit to check cyanuric acid levels before application. Add to the skimmer with a clean filter and circulate water continuously for 24 hours to allow full distribution.
• Fast Dissolving Formula – This quick dissolving pool stabilizer disperses efficiently to establish chlorine protection. Use 2 lbs per 10,000 gallons and dose based on the amount of water replaced, not total pool capacity, for accurate cyanuric acid level adjustment.
• Supports Balanced Pool Water – Designed to help maintain proper stabilizer levels, Rx Clear Conditioner supports overall water balance and seasonal pool maintenance without affecting chlorine type or system compatibility.

Details: Rx Clear Stabilizer and Conditioner – 100% Cyanuric Acid Pool Stabilizer

Rx Clear Stabilizer and Conditioner is formulated to help reduce chlorine loss caused by the sun’s UV rays, supporting more consistent chlorine levels in your swimming pool. By helping protect free chlorine from rapid UV degradation, this pool stabilizer supports improved chlorine longevity when added at the start of the season.

Made with 100% cyanuric acid, this conditioner is designed to help establish and maintain a stabilizer level of 30–50 ppm in the spring. Proper cyanuric acid levels help extend chlorine life and support balanced pool water in both above ground and inground pools.

Application & Dosage

Use 2 lbs per 10,000 gallons as a general guideline. Always add stabilizer based on the amount of water being replaced — not total pool capacity.

Recommended Chlorine & pH Levels:

-Maintain chlorine residual at 2.0–4.0 ppm -Maintain pH at 7.4–7.6

Dosage Chart:

5,000 Gallons -10 ppm: 6.3 oz -20 ppm: 12.5 oz -30 ppm: 1.2 lbs -40 ppm: 1.6 lbs -50 ppm: 2.0 lbs
10,000 Gallons -10 ppm: 12.5 oz -20 ppm: 1.6 lbs -30 ppm: 2.3 lbs -40 ppm: 3.1 lbs -50 ppm: 3.9 lbs
20,000 Gallons -10 ppm: 1.6 lbs -20 ppm: 3.1 lbs -30 ppm: 4.7 lbs -40 ppm: 6.3 lbs -50 ppm: 7.8 lbs
By maintaining proper cyanuric acid levels, Rx Clear Stabilizer and Conditioner helps improve chlorine efficiency and supports balanced, well-maintained pool water throughout the season.

Package Dimensions: 10.7 x 9.5 x 9.5 inches